One set conveyor belt vulcanizing press for 1800mm belt width has been delivered to Nigeria. It is traditional old type machine. The heating plate size is 2080*1060mm, with 20°bias angle. It takes about 30mins to heat up to 145℃. The machine has water cooling system, we also provide water cooling pump. In addition, we equip […]

Possible Causes and Solutions for Bubbles in Belt Splices The appearance of bubbles in belt splices (especially rubber conveyor belt splices) can severely compromise joint strength and durability. Below are potential causes and corresponding solutions:   I. Vulcanization Process Issues   1. Insufficient Vulcanization Temperature      – Cause: Temperature does not meet vulcanization requirements (typically […]

One set conveyor belt cutting machine is exported to Norway. The electric tool is used for cutting the rubber conveyor belt. The voltage is 220V, single phase. If you are interested, feel free to contact us.

Two Sets PVC Belt Machine Are Exported To America In The End Of October One set air cooled PVC belt press and one set manual finger punch machine for 24in belt width were exported to America in the end of October. The air cooled PVC belt press is very light and portable with flight case as standard packing, is […]

Thirteen days to finish one set vulcanizing machine for delivering to America. Customer needs the machine urgently, so we speed up the manufacturing process, and deliver the machine ahead of schedule on the base of good quality. The machine is for 60in belt width. The heating plate size is 1770X1078mm+1770X820mm(vertical), with 22° bias angle. The […]